BS EN ISO 4126-3-2006 过压保护安全设备.组合中防爆板安全装置和安全阀门

标准号：BS EN ISO 4126-3-2006
中文标准名称：过压保护安全设备.组合中防爆板安全装置和安全阀门
英文标准名称：Safety devices for protection against excessive pressure — Part 3: Safety valves and bursting disc safety devices in combination (ISO 4126-3:2006)
标准类型：J16
发布日期：2009/4/30 12:00:00
实施日期：2009/4/30 12:00:00
中国标准分类号：J16
国际标准分类号：13.240;23.060.40
引用标准：ISO 4126-1-2004;ISO 4126-2-2003;ISO 4126-4-2004;ISO 4126-5-2004;ISO 4126-6-2003;EN 13480-2-2002;EN 764-7-2002;EN 13480-1-2002;EN 13480-3-2002;EN 13480-4-2002;EN 13480-5-2002;EN 13480-6-2002;CEN/TR 13480-7-2002
适用范围：This part of ISO 4126 specifies the requirements for a product assembled from the in-series combination ofsafety valves or CSPRS (controlled safety pressure relief systems) according to ISO 4126-1, ISO 4126-4 andISO 4126-5, and bursting disc safety devices according to ISO 4126-2 installed within no more than five pipediameters from the valve inlet. It specifies the design, application and marking requirements for such products,which are used to protect pressure vessels, piping or other enclosures from excessive pressure, and whichcomprise the bursting disc safety device, a safety valve or CSPRS and, where applicable, a short length ofconnecting pipe or spool piece. In addition, it gives a method for establishing the combination discharge factorused in sizing combinations.