BS EN 15255-2007 建筑物的能量性能.有效的房间制冷负荷计算.一般标准和确认程序

百检网 2021-07-15
标准号:BS EN 15255-2007
中文标准名称:建筑物的能量性能.有效的房间制冷负荷计算.一般标准和确认程序
英文标准名称:Energy performance of buildings - Sensible room cooling load calculation - General criteria and validation procedures
标准类型:P31
发布日期:2007/9/28 12:00:00
实施日期:2007/9/28 12:00:00
中国标准分类号:P31
国际标准分类号:91.120.10
引用标准:EN 410;EN 13363-2;EN 15377-1;prEN ISO 9646;EN ISO 7345-1995;EN ISO 9251-1995;EN ISO 9288-1996;EN ISO 9346-2007;EN ISO 10077-1;prEN ISO 13370;prEN ISO 13786;EN ISO 13792-2005
适用范围:This European Standard sets out the level of input and output data, and prescribes the boundary conditionsrequired for a calculation method of the sensible cooling load of a single room under constant and/or floatingtemperature taking into account the limit of the peak cooling load of the system. It includes a classificationscheme of the calculation method and the criteria to be met by a calculation method in order to comply withthis European Standard.The purpose of this European Standard is to validate calculation methods used to: evaluate the maximum cooling load for equipment selection and cooling system design; evaluate the temperature profile when the cooling capacity of the system is reduced; provide data for evaluation of the optimum possibilities for load reduction; allow analysis of partial loads as required for system design, operation and control.The validation procedure is used to check the room sensible heat balance model, taking into account: the external surface heat balance; the conduction through the building envelope; the effect of the thermal mass of the structures; the internal surface heat balance; the air heat balance; the heat balance solution method.All other aspects are given either by fixed boundary conditions or by input data and are not in the focus of themodel validation. It is assumed that for all these other matters e.g. embedded heating and cooling systems,prescriptive models have to be used according to existing European Standards.Informative Annex A gives a simplified method for cooling load calculation.

百检能给您带来哪些改变?

1、检测行业全覆盖,满足不同的检测;

2、实验室全覆盖,就近分配本地化检测;

3、工程师一对一服务,让检测更精准;

4、免费初检,初检不收取检测费用;

5、自助下单 快递免费上门取样;

6、周期短,费用低,服务周到;

7、拥有CMA、CNAS、CAL等权威资质;

8、检测报告权威有效、中国通用;

客户案例展示

  • 上海朗波王服饰有限公司
  • 浙江圣达生物药业股份有限公司
  • 天津市长庆电子科技有限公司
  • 上海纽特丝纺织品有限公司
  • 无锡露米娅纺织有限公司
  • 东方电气风电(凉山)有限公司