BS EN 13035-2-2008 平面玻璃的制造、处理和加工用机械和设备.安全要求.工厂外部储存、装卸与运输设备

标准号：BS EN 13035-2-2008
中文标准名称：平面玻璃的制造、处理和加工用机械和设备.安全要求.工厂外部储存、装卸与运输设备
英文标准名称：Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 2: Storage, handling and transportation equipment outside the factory
标准类型：Y93;Q93
发布日期：2008/4/30 12:00:00
实施日期：2008/4/30 12:00:00
中国标准分类号：Y93;Q93
国际标准分类号：81.100
引用标准：EN 294-1992;EN 953-1997;EN 954-1-1996;EN 981-1996;EN 983-1996;EN 999-1998;EN 1037-1995;EN 1088-1995;EN 12195-1-2003;EN 13035-1-2007;EN 13155-2003;EN 60204-1-2006;EN ISO 11201-1995;EN ISO 11202-1995;EN ISO 12100-1-2003;EN ISO 12100-2-2003;EN ISO 13850-2006
适用范围：1.1 This standard contains the requirements for safety for the design and installation of equipment intendedfor the storage (as defined in 3.2.1), handling (as defined in 3.2.2) and transportation (as defined in 3.2.3) offlat glass outside the factory (as defined in 3.1.1) and including stillages, pallets, frails fixed to vehicles, inloadervehicles, specific glass-securing devices, stanchions and vacuum-lifting devices which are used forroad transport and on building sites.1.2 Specific hazards due to the use inside the factory are dealt with in EN 13035-1.1.3 This standard deals only with the devices which are directly in contact with the glass. This standarddoes not apply to manual handling equipment such as carrying straps and vacuum pads. Tractors, cranes,hoists and fork lifts are out of the scope as well as parts of other powered vehicles that are not in contact withthe glass. This European Standard does not apply to equipment for the transport by other ways than on roade.g. by ship or train, and the transportation of glazed windows/frames.1.4 This standard deals with all significant hazards, hazardous situations and events relevant to equipmentfor the storage, handling and transportation of flat glass, when they are used as intended and under conditionsof misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This standard specifies theappropriate technical measures to eliminate or reduce risks arising from the significant hazards duringcommissioning, the operation and maintenance. Noise has not been considered to be a significant hazard forany type of equipment in the scope of this standard.1.5 This document is not applicable to storage, handling or transportation equipment for flat glass outsidethe factory, which is manufactured before the date of its publication as EN.