BS EN 14789-2005 固定源排放.氧(O2)体积密度的测定.参照方法.顺磁性

百检网 2021-07-15
标准号:BS EN 14789-2005
中文标准名称:固定源排放.氧(O2)体积密度的测定.参照方法.顺磁性
英文标准名称:Stationary source emissions - Determination of volume concentration of oxygen (O
标准类型:Z15
发布日期:2006/1/16 12:00:00
实施日期:2006/1/16 12:00:00
中国标准分类号:Z15
国际标准分类号:13.040.40
引用标准:CEN/TS 14793;ENV 13005;EN ISO 14956
适用范围:This European Standard describes the paramagnetic method, including the sampling and the gas conditioning system, to determine the oxygen concentrations in flue gases emitted to the atmosphere from ducts and stacks.This European Standard is the Standard Reference Method (SRM) for periodic monitoring and for the calibration or control of Automatic Measuring Systems (AMS) permanently installed on a stack, for regulatory purposes or other purposes. To be used as the SRM, the user shall demonstrate that the performance characteristics of the method are better than the performance criteria defined in this European Standard and that the overall uncertainty of the method is less than ± 6,0 % of the measured concentration.NOTE When paramagnetism is the measurement principle used for AMS, reference should be made to EN 14181 and other relevant standards provided by CEN/TC 264.An alternative method to this SRM may be used provided that the user can demonstrate equivalence according to the Technical Specification CEN/TS 14793, to the satisfaction of his national accreditation body or law.This Standard Reference Method has been evaluated during field tests on waste incineration, co-incineration and large combustion installations. It has been validated for sampling periods of 30 min in the range: 5 % to 26 %. Oxygen concentration values, expressed in % volume, are used in order to allow emission measurements of pollutants to be standardised to the reference O2 concentration and dry gas conditions required by the following Council Directives: Council Directive 2001/80/EC on the limitation of emissions of certain pollutants into the air from large combustion plants; Council Directive 2000/76/EC on waste incineration plants.

百检能给您带来哪些改变?

1、检测行业全覆盖,满足不同的检测;

2、实验室全覆盖,就近分配本地化检测;

3、工程师一对一服务,让检测更精准;

4、免费初检,初检不收取检测费用;

5、自助下单 快递免费上门取样;

6、周期短,费用低,服务周到;

7、拥有CMA、CNAS、CAL等权威资质;

8、检测报告权威有效、中国通用;

客户案例展示

  • 上海朗波王服饰有限公司
  • 浙江圣达生物药业股份有限公司
  • 天津市长庆电子科技有限公司
  • 上海纽特丝纺织品有限公司
  • 无锡露米娅纺织有限公司
  • 东方电气风电(凉山)有限公司