BS EN 62129-2006 光谱分析仪的校正

标准号：BS EN 62129-2006
中文标准名称：光谱分析仪的校正
英文标准名称：Calibration of optical spectrum analyzers
标准类型：N35
发布日期：2006/5/31 12:00:00
实施日期：2006/5/31 12:00:00
中国标准分类号：N35
国际标准分类号：17.180.30;33.180.99
引用标准：IEC 60050-731;IEC 60359;IEC 60793-1;IEC 60825-1;IEC 60825-2;IEC 61290-3-1;BIPM, IEC, IFCC, ISO, IUPAC, IUPAP, and OIML-1993;BIPM, IEC, IFCC, ISO, IUPAC, IUPAP, and OIML, Guide to the expression of uncertainty in measurement (GUM)
适用范围：This International Standard provides procedures for calibrating an optical spectrum analyzerdesigned to measure the power distribution of an optical spectrum. This analyzer is equippedwith an input port for use with a fibre-optic connector.An optical spectrum analyzer is equipped with the following minimum features:a) the ability to present a display of an optical spectrum with respect to absolute wavelength;b) a marker/cursor that displays the optical power and wavelength at a point on the spectrumdisplay.NOTE This standard applies to optical spectrum analyzers developed for use in fibre-optic communications, andis limited to equipment that can directly measure the optical spectrum output from an optical fibre, where theoptical fibre is connected to an input port installed in the optical spectrum analyzer through a fibre-optic connector.In addition, an optical spectrum analyzer can measure the spectral power distribution withrespect to the absolute wavelength of the tested light and display the results of suchmeasurements. It will not include an optical wavelength meter that measures only centrewavelengths, a Fabry-Perot interferometer or a monochromator that has no display unit.The procedures outlined in this standard are considered to be mainly performed by users ofoptical spectrum analyzers. The document, therefore, does not include correction using thecalibration results in the main body. The correction procedures are described in Annex C.Of course, this standard will be useful in calibration laboratories and for manufacturers ofoptical spectrum analyzers.