标准号:BS EN 61000-6-3-2007+A1-2011
中文标准名称:电磁兼容性(EMC).通用标准.住宅,商业和轻工业环境的辐射标准
英文标准名称:Electromagnetic compatibility (EMC). Generic standards. Emission standard for residential, commercial and light-industrial environments
标准类型:L06
发布日期:2007/2/28 12:00:00
实施日期:2007/2/28 12:00:00
中国标准分类号:L06
国际标准分类号:33.100.10
引用标准:IEC 60050-161;IEC 61000-3-2-2005;IEC 61000-3-3-2008;IEC 61000-3-11-2000;IEC 61000-3-12-2004;IEC 61000-4-20-2010;CISPR 14-1-2005;CISPR 16-1-1-2010;CISPR 16-1-2-2003;CISPR 16-1-4-2007;CISPR 16-2-1-2008;CISPR 16-2-3-2006;CISPR 16-4-2-2003;CISPR 22-2008
适用范围:This part of IEC 61000 for EMC emission requirements applies to electrical and electronicapparatus intended for use in residential, commercial and light-industrial environments.Emission requirements in the frequency range 0 Hz to 400 GHz are covered. Nomeasurement needs to be performed at frequencies where no requirement is specified.This generic EMC emission standard is applicable if no relevant dedicated product or productfamilyEMC emission standard exists.This standard applies to apparatus intended to be directly connected to a low-voltage publicmains network or connected to a dedicated DC source, which is intended to interface betweenthe apparatus and the low-voltage public mains network. This standard applies also toapparatus which is battery operated or is powered by a non-public, but non-industrial, lowvoltagepower distribution system if this apparatus is intended to be used in the locationsdescribed below.The environments encompassed by this standard are residential, commercial and lightindustriallocations, both indoor and outdoor. The following list, although not comprehensive,gives an indication of locations that are included:– residential properties, for example houses, apartments;– retail outlets, for example shops, supermarkets;– business premises, for example offices, banks;– areas of public entertainment, for example cinemas, public bars, dance halls;– outdoor locations, for example petrol stations, car parks, amusement and sports centres;– light-industrial locations, for example workshops, laboratories, service centres.Locations that are characterised by being supplied directly at low voltage from the publicmains network are considered to be residential, commercial or light-industrial.The object of this standard is to define the emission test requirements for apparatus definedin the scope in relation to continuous and transient, conducted and radiated disturbances.The emission requirements have been selected so as to ensure that disturbances generatedby apparatus operating normally in residential, commercial and light-industrial locations donot exceed a level which could prevent other apparatus from operating as intended. Faultconditions of apparatus are not taken into account. Not all disturbance phenomena have beenincluded for testing purposes in this standard but only those considered as relevant for theequipment covered by this standard. These requirements represent essential electromagneticcompatibility emission requirements.Requirements are specified for each port considered.