ANSI/ASTM B804-1996 UNS N08367和UNS N08926焊接管规范

标准号：ANSI/ASTM B804-1996
中文标准名称：UNS N08367和UNS N08926焊接管规范
英文标准名称：Specification for UNS N08367 and UNS N08926 Welded Pipe
标准类型：H62
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：H62
国际标准分类号：77.150.40
适用范围： This specification covers UNS N08367 and UNS N08926 welded pipe for general corrosion applications. (Although no restrictions are placed on the sizes of pipe that may be furnished under this specification, commercial practice is commonly limited to sizes not less than 8 in. nominal diameter.) Six classes of pipe are covered as follows: Class 1 pipe shall be double welded by processes employing filler metal in all passes and shall be completely radiographed. Class 2 pipe shall be double welded by processes employing filler metal in all passes. No radiography is required. Class 3 pipe shall be double welded by processes employing filler metal in all passes except the inside root weld may be made without the addition of filler metal. Welds are to be completely radiographed. Class 4 pipe shall be double welded by processes employing filler metal in all passes except the inside root weld may be made without the addition of filler metal. No radiography is required. Class 5 pipe shall be single welded by processes employing filler metal in all passes except that the pass exposed to the inside pipe surface may be made without the addition of filler metal. Welds are to be completely radiographed. Class 6 pipe shall be single welded by processes employing filler metal in all passes except that the pass exposed to the inside pipe surface may be made without the addition of filler metal. No radiography is required. The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. The following safety hazards caveat pertains only to the test methods portion, Section 12, of this standard: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.