ISO 14922-2-1999 热喷涂 热喷涂结构的质量要求 第2部分:全面质量要求

标准号：ISO 14922-2-1999
中文标准名称：热喷涂 热喷涂结构的质量要求 第2部分:全面质量要求
英文标准名称：Thermal spraying - Quality requirements of thermally sprayed structures - Part 2: Comprehensive quality requirements
标准类型：A29
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：A29
国际标准分类号：25.220.20
适用范围：This standard specifies requirements so that: - It is independent of the type of the thermally sprayed structure. - It defines quality requirements for thermal spraying both in workshops and on site. - It provides guidance for describing a manufacturer's capability to produce thermally sprayed constructions to meet specified requirements. - It may also be used as a basis for assessing the manufacturer in respect to his thermal spraying capability. This standard is appropriate when demonstration of a manufacturer's capability to produce thermally sprayed construction, fulfilling specified quality requirements, are specified in one or more of the following: - a contract between involved parties; - an application standard; - a regulatory requirement. The requirements contained within this standard may be adopted in full or may be selectively deleted by the manufacturer if not applicable to the construction concerned. They provide a flexible framework for the control of thermal spraying in the following cases: - Case 1 To provide specific requirements for thermal spraying in contracts which require the manufacturer to have a quality system in accordance with EN ISO 9001 or EN ISO 9002. - Case 2 To provide specific requirements for thermal spraying in contracts which require the manufacturer to have a quality system other than EN ISO 9001 or EN ISO 9002. - Case 3 To provide specific requirements for thermal spraying in contracts which require the manufacturer developing a quality system. - Case 4 To provide specific requirements for thermal spraying in application standards which uses thermal spraying as part of its requirements or in a contract between relevant parties. It may however be more appropriate for EN ISO 14922-3 or EN ISO 14922-4 to be used in such cases.