SAE AMS 5529J-2012 标称厚度为0.0015-0.050 in(0.038-1.27 mm)的沉淀硬化溶液热处理和冷轧耐腐蚀合金钢(17铬,7.1镍,1.1铝)板材和带材

百检网 2021-07-19
标准号:SAE AMS 5529J-2012
中文标准名称:标称厚度为0.0015-0.050 in(0.038-1.27 mm)的沉淀硬化溶液热处理和冷轧耐腐蚀合金钢(17铬,7.1镍,1.1铝)板材和带材
英文标准名称:Steel, Corrosion Resistant, Sheet and Strip 17Cr 7.1Ni 1.1Al Solution Heat Treated and Cold Rolled, Precipitation Hardenable 0.0015 to 0.100 Inch (0.038 to 2.54 mm) Nominal Thickness
标准类型:V11
发布日期:2012/2/20 12:00:00
实施日期:1999/12/31 12:00:00
中国标准分类号:V11
国际标准分类号:49.025.10
引用标准:ASTM A 370-2011;ASTM E 353-1993;ASTM E 384-2011;SAE AMS 2242;SAE AMS 2248;SAE AMS 2371;SAE AMS 2807-1991;SAE ARP 1110
适用范围:This specification covers a corrosion-resistant steel in the form of sheet and strip 0.0015 to 0.100 inch (0.038 to 2.54 mm) in nominal thickness. These products have been used typically for parts such as springs requiring corrosion resistance and high strength up to 600 °F (316 °C), but usage is not limited to such applications. Strength of these cold-worked products will be impaired if parts require welding during fabrication. Certain design and processing procedures may causes these products to become subject to stress-corrosion cracking; SAE ARP 1110 recommends practices to minimize such conditions.

百检能给您带来哪些改变?

1、检测行业全覆盖,满足不同的检测;

2、实验室全覆盖,就近分配本地化检测;

3、工程师一对一服务,让检测更精准;

4、免费初检,初检不收取检测费用;

5、自助下单 快递免费上门取样;

6、周期短,费用低,服务周到;

7、拥有CMA、CNAS、CAL等权威资质;

8、检测报告权威有效、中国通用;

客户案例展示

  • 上海朗波王服饰有限公司
  • 浙江圣达生物药业股份有限公司
  • 天津市长庆电子科技有限公司
  • 上海纽特丝纺织品有限公司
  • 无锡露米娅纺织有限公司
  • 东方电气风电(凉山)有限公司