DIN EN ISO 28927-10-2011 手持便携式电动工具.振动辐射的评价用试验方法.第10部分:冲击钻,冲击锤和冲击压碎机(ISO 28927-10-2011).德文版本EN ISO 28

标准号：DIN EN ISO 28927-10-2011
中文标准名称：手持便携式电动工具.振动辐射的评价用试验方法.第10部分:冲击钻,冲击锤和冲击压碎机(ISO 28927-10-2011).德文版本EN ISO 28927-10-2011
英文标准名称：Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 10: Percussive drills, hammers and breakers (ISO 28927-10:2011); German version EN ISO 28927-10:2011
标准类型：Z32
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：Z32
国际标准分类号：13.160;25.140.10;25.140.01;17.160
引用标准：ISO 2787;ISO 5349;ISO 5391-2003;ISO 17066;ISO 20643-2005;EN 12096
适用范围：This part of ISO 28927 specifies a laboratory method for measuring hand-transmitted vibration emission at the handles of hand-held power driven percussive machines with and without rotary action (portable rock drills, plug hole drills, rotary hammers, breakers (e. g. pavement breakers, concrete breakers or road breakers), riveting hammers, chipping hammers, pick hammers, or similar). It is a type-test procedure for establishing the magnitude of vibration in the gripping areas of a machine fitted with an inserted too bit. This part of ISO 28927 is applicable to hand-held machines (see Clause 5), driven penumatically or by other means, intended for making holes in hard materials like rock and concrete. It also applies to breakers intended to work downwards to break hard materials (concrete, rock, pavement, asphalt, etc.) and for hammers intend to work in any direction to perform riveting or chiselling work. It is not applicable to type impact drills with direct mechanical impact mechanisms. This part of ISO 28927 is not applicable to jack leg type rock drills and push feed rock drills, which are hand guided (the feed force is not applied by hand, but by an additional device). It is intended that results be used to compare different models of the same type of machine.