标准号:DIN EN 14070-2009
中文标准名称:机械工具的安全.组合机床和专用机床(含修改件A1:2009),英文版本DIN EN 14070:2009-07
英文标准名称:Safety of machine tools - Transfer and special-purpose machines (includes Amendment A1:2009); English version of DIN EN 14070:2009-07
标准类型:J58
发布日期:1999/12/31 12:00:00
实施日期:2009/7/1 12:00:00
中国标准分类号:J58
国际标准分类号:25.080.01
引用标准:EN 292-1-1991;EN 292-2-1991;EN 292-2-1991/A1-1995;EN 294-1992;EN 349;EN 574;EN 614-1;EN 614-2;EN 626-1;EN 811-1996;EN 894-1;EN 894-2;EN 894-3-2000;EN 953-1997;EN 954-1;EN 982-1996;EN 983-1996;EN 999;EN 1005-1;EN 1005-2;EN 1005-3;EN 1037-1995;EN 1050-1996
适用范围:1.1 This standard specifies the technical safety requirements and protective measures to be adopted bypersons undertaking the design, construction and supply (including information which must be provided forinstallation and dismantling, with arrangements for transport and maintenance) of transfer and special purposemachines (see 3.1). These machines are designed to process only a pre-specified metal or analogousmaterial workpiece, or limited family of similar workpieces by means of a predetermined sequence ofmachining operations and process parameters.1.2 This standard takes account of intended use, including reasonably foreseeable misuse, maintenance,cleaning, and setting operations. It specifies access arrangements to machining positions and manualload/unload stations (see 3.4). It presumes access to the machine from all directions. It describes means toreduce risks to operators and other exposed persons.1.3 This standard also applies to transport devices for workpiece load/unload when they form an integralpart of the machine.1.4 This standard deals with significant hazards relevant to transfer and special purpose machines whenthey are used as intended and under the conditions foreseen by the manufacturer (see clause 4). The safetyrequirements and/or protective measures to prevent or minimise those hazards identified in Table 1 andprocedures for verification of these requirements or measures are found in clause 5. Safety requirementsand/or measures are not specified for: Fire and Explosion1.5 Where machines employ processes which are covered by other standards (e.g. grinding, turning,forming, EDM, laser processing), the requirements of those standards should be applied (see Bibliography).1.6 This standard applies to machines which are manufactured after publication of this standard by CEN.