标准号:BS EN 969-2009
中文标准名称:输气用球墨铸铁管,配件,附件及其接头.要求和测试方法
英文标准名称:Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods
标准类型:Q82
发布日期:2009/4/30 12:00:00
实施日期:2009/4/30 12:00:00
中国标准分类号:Q82
国际标准分类号:23.040.10;23.040.40
引用标准:EN 545-2006;EN 681-1;EN 682;EN 1092-2;EN ISO 4016;EN ISO 4034;EN ISO 6506-1;EN ISO 7091
适用范围:This European Standard specifies the requirements and associated test methods applicable to ductile ironpipes, fittings, accessories and their joints used for the construction of pipelines outside buildings: to convey air or combustible gases (e.g. natural gas or town gas) at pressures up to 16 bar; to be installed below or above ground.NOTE 1 A combustible gas is a gas or any fuel that is in gaseous state at a temperature of 15 °C at a pressure of 1 bar.This European Standard applies to pipes, fittings and accessories which are: manufactured with socketed, flanged or spigot ends; normally delivered externally and internally coated; suitable for gas temperatures between − 15 °C and 50 °C.This European Standard covers pipes, fittings and accessories cast by any type of foundry process ormanufactured by fabrication of cast components, as well as corresponding joints, in a size range extendingfrom DN 40 to DN 600 inclusive.This European Standard specifies requirements for materials, dimensions and tolerances, mechanicalproperties and standard coatings of ductile iron pipes and fittings. It also gives performance requirements forall components including joints. Joint design and gasket shape are outside the scope of this EuropeanStandard.NOTE 2 In this European Standard, all pressures are relative pressures expressed in bars (100 kPa = 1 bar).