标准号:UL 2459-2008
中文标准名称:绝缘的多*分线连接器
英文标准名称:Insulated multi-pole splicing wire connectors
标准类型:K30
发布日期:2008/8/22 12:00:00
实施日期:1999/12/31 12:00:00
中国标准分类号:K30
国际标准分类号:29.120.30
引用标准:CSA C22.1-2006;CAN/CSA C22.2 No.0-M-1991(R2006);CAN/CSA C22.2 No.0.17-M-2000(R2004);CAN/CSA C22.2 No.65-2003;CSA C22.2 ****53-M-1981(R2003);CSA C22.2 NO. 182.1-2007;CSA C22.2 NO. 182.3-M-1987(R2004);CAN/CSA C22.2 No. 188-2004;UL 94;UL 310;UL 486A-486B;UL
适用范围:1.1 This Standard covers insulated multi-pole mating or non-mating splicing wire connectors intended forfield wiring and factory wiring for use in accordance with the Canadian Electrical Code, Part I, in Canada,and NFPA 70, National Electrical Code, in the United States.1.2 These wire connectors are intended to facilitate the connection of devices, such as prefabricatedwiring assemblies, smoke detectors, and lighting products, to the branch circuit conductors of buildings.1.3 These wire connectors may additionally be used internal to luminaries to facilitate replacement of theballast and may not be directly attached to the branch circuit conductors. These wire connectors aresuitable for one or more conductors per contact.1.4 These wire connectors are suitable for use with 30 to 6 AWG (0.05 to 13.3 mm2) stranded copperconductors and 30 to 10 AWG (0.05 to 5.3 mm2) solid copper conductors.1.5 These wire connectors are suitable for currents not exceeding the ampacity of insulated conductorsor as rated by the manufacturer.1.6 These wire connectors are suitable for voltages not exceeding 600 V.1.7 This Standard does not apply to(a) splicing wire connectors intended for direct burial;(b) insulated splicing wire connectors intended for use at voltage levels exceeding 600 V (1000V in a sign or luminaire);(c) terminal wire connectors;(d) wire binding screw terminals;(e) built-in terminal connectors on devices having integral cable clamps;(f) flat quick-connect terminals;(g) devices, such as wire connectors and soldering lugs, that are covered by(i) CAN/CSA-C22.2 No. 65 or UL 486A-486B;(ii) CAN/CSA-C22.2 No. 188 or UL 486C; or(iii) UL 486E;(h) devices, such as quick-connect terminals, that are covered by CSA C22.2 No. 153 or UL310;(i) devices covered by CSA C22.2 No. 182.3 or UL 1977; and(j) devices, such as pin and sleeve connectors, that are covered by CSA C22.2 No. 182.1 orUL 1682.