标准号:SAE J 2288-2008
中文标准名称:电车蓄电池模块的寿命周期测试
英文标准名称:Life Cycle Testing of Electric Vehicle Battery Modules
标准类型:K84
发布日期:2008/6/1 12:00:00
实施日期:1999/12/31 12:00:00
中国标准分类号:K84
国际标准分类号:29.220.20;43.120
引用标准:SAE J 1715;SAE J 1797;SAE J 1798;U. S. Advanced Battery Consortium Electric Vehicle Battery Test Procedures Manual, Revision 2, January 1996
适用范围:This SAE Recommended Practice defines a standardized test method to determine the expectedservice life, in cycles, of electric vehicle battery modules. It is based on a set of nominal or baseline operating conditions in order to characterize the expected degradation in electrical performance as a function of life and to identify relevant failure mechanisms where possible. Accelerated aging is not included in the scope of this procedure, although the time compression resulting from continuous testing may unintentionally accelerate battery degradation unless test conditions are carefully controlled. The process used to define a test matrix of accelerated aging conditions based on failure mechanisms, and to establish statistical confidence levels for the results, is considered beyond the scope of this document. Because the intent is to use standard testing conditions whenever possible, results from the evaluation of different technologies should be comparable. End-of-life is determined based on module capacity and powerratings. This may result in a measured cycle life different than that which would be determined based on actual capacity; however, this approach permits a battery manufacturer to make necessary tradeoffs between power and energy in establishing ratings for a battery module. This approach is considered appropriate for a mature design or production battery. It should be noted that the procedure defined in this document is functionally identical to the USABC Baseline Life Cycle Test Procedure.