SAE ARP 1334C-2011 飞机集装设备兼容性的地面设备要求

标准号：SAE ARP 1334C-2011
中文标准名称：飞机集装设备兼容性的地面设备要求
英文标准名称：Ground Equipment Requirements for Compatibility with Aircraft Unit Load Devices
标准类型：V56
发布日期：2011/9/7 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：V56
国际标准分类号：49.100
引用标准：ISO 4116-1986;SAE ARP 1372;IATA/AHM 911
适用范围：This SAE Aerospace Recommended Practice (ARP) specifies requirements for those portions of the aircraft unit load device ground and terminal handling equipment that will have a direct bearing on the life of the device for the purpose of preventing undue wear on the device. Past experience has shown that in-service defects in regard to the above equipment cause high devices cost. Greater control of maintenance is required. Included in this document are requirements for conveyor systems, guides, stops, resitraint hardware that are used on trucks, transporters, dollies, storage provisions, pallet build-up hoists, or other ULD-handling equipment. These requirements reflect state of the art criteria applied to known successfully operated hardware. Any design deviations shall be required to demonstrate equivalency to this specification criteria. These ULD's usually form an integral part of the aircraft and as such are subject to regulatory agencies' requirements to assure structural intgrity. Size, shape and load capacities for ULD's are not included in this document. These can be obtained from SAE or IATA speciications, the airline operator and the ULD manufacturer.