BS EN 15166-2008 食品加工机.屠宰牲畜的自动背部剥皮机.安全和卫生要求

标准号：BS EN 15166-2008
中文标准名称：食品加工机.屠宰牲畜的自动背部剥皮机.安全和卫生要求
英文标准名称：Food processing machinery - Automatic back splitting machines of butchery carcasses - Safety and hygiene requirements
标准类型：X99
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：X99
国际标准分类号：67.260
引用标准：EN 1088-1995;EN 1672-2-2005;EN 60204-1-2006;EN 60529;EN 61310-1;EN ISO 3744-1995;EN ISO 4871;EN ISO 11204-1995;EN ISO 12100-1-2003;EN ISO 13849-1;EN ISO 13850;EN ISO 13857-2008;EN ISO 14121-1;EN 614-1;EN 953-1997;EN 982;EN 983;EN 1005-1;EN 1005-2;EN 1005-
适用范围：This European Standard applies to automatic back splitting machines and specifies safety and healthrequirements for machines used in slaughterhouses in order to fully automatically split meat animal (beef andpork) along the back-bone axis, splitting the carcass into two parts (see Figure 1).This document deals with all significant hazards, hazardous situations and events relevant to automatic backsplitting machines, when they are used as intended and under conditions of misuse which are reasonablyforeseeable by the manufacturer (see Clause 4).This document deals with the significant hazards, hazardous situations and events during transport, assemblyand installation, commissioning and use as defined in EN ISO 12100-1:2003, 5.3.This document is not applicable to automatic back splitting machines, which are manufactured before the dateof its publication as EN.The machines concerned by this standard are those used in slaughterhouses. They are fitted with a cuttingdevice and are driven by electric, hydraulic and/or pneumatic energy.The utilized cutting tools are: circular saws, splitting tools.Three types of machines are considered (see Figures 1 to 11): Splitting machines for pork carcasses, type A (splitter), Splitting machines for pork carcasses, type B (circular saw), Splitting machines for beef carcasses, type C (circular saw).There are two different operation cycles: carcasses can be splitted when they are at standstill (in general they are hanging on a sequenceconveyed transport system); carcasses can also be splitted during their continuous movement by conveyor; in this case the movementof the tool is synchronized with that of the carcass.When the split is finished, the cutting tool returns automatically to its initial position.The machines run automatically. Under normal operating conditions there is no manual intervention.