BS EN 1555-4-2004 供应气体燃料用塑料管道系统.聚乙烯(PE).阀门

标准号：BS EN 1555-4-2004
中文标准名称：供应气体燃料用塑料管道系统.聚乙烯(PE).阀门
英文标准名称：Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Valves
标准类型：P94
发布日期：2004/1/7 12:00:00
实施日期：2004/1/7 12:00:00
中国标准分类号：P94
国际标准分类号：23.060.01;91.140.40
适用范围：This part of EN 1555 specifies the characteristics of valves made from polyethylene (PE) for piping systems in the field of the supply of gaseous fuels. NOTE Valves made from other material than polyethylene designed for the supply of gaseous fuels conforming to the relevant standards are permitted to be used in PE piping system according to EN 1555 provided they have relevant PE connection for butt fusion or electrofusion ends (see EN 1555-3). It also specifies the test parameters for the test methods referred to in this standard. In conjunction with the other parts of EN 1555, it is applicable to PE valves, their joints and to joints with components of PE and other materials intended to be used under the following conditions: a) a maximum operating pressure, MOP, up to and including 10 bar; b) an operating temperature of 20 ℃ as reference temperature; NOTE 1 For other operating temperatures, derating coefficients should be used, see EN 1555-5. c) an operating temperature between -20 ℃ and +40 ℃. EN 1555 covers a range of maximum operating pressures and gives requirements concerning colours and additives. NOTE 2 It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national regulations and installation practices or codes. It is applicable to bi-directional valves with spigot end or electrofusion socket intended to be fused with PE pipes conforming to EN 1555-2 without any fittings or with PE fittings conforming to EN 1555-3. This part of EN 1555 covers valves with a nominal size DN/OD ≤ 225. note:1)1 bar = 0.1 MPa