标准号:ISO 12714-1999
中文标准名称:无损检测 声发射检查 声发射传感器的二级校准
英文标准名称:Non-destructive testing - Acoustic emission inspection - Secondary calibration of acoustic emission sensors
标准类型:H26
发布日期:1999/12/31 12:00:00
实施日期:1999/12/31 12:00:00
中国标准分类号:H26
国际标准分类号:19.100
适用范围:This International Standard specifies a method for the secondary calibration of acoustic emission sensors as receivers of elastic waves at the surface of a solid medium. The International Standard is applicable to laboratory tertiary standard sensors and acoustic emission applications sensors.
The secondary calibration yields the frequency response of a sensor to waves of a type normally encountered in acoustic emission work, namely Rayleigh waves. The source producing the signal used for the calibration is mounted on the same surface of a test block as the sensor under test (SUT). The sensitivity of the sensor is determined for excitation within the range of 100 kHz to 1 MHz. Sensitivity values are usually determined at frequencies approximately 10 kHz apart. The units of the calibration are volts per unit of mechanical input (displacement, velocity or acceleration).