BS EN ISO 10360-5-2010 产品几何量规范(GPS).坐标式测量设备(CMM)的验收和复检试验.带单针和多触针探测系统的坐标测量机(CMMs)

标准号：BS EN ISO 10360-5-2010
中文标准名称：产品几何量规范(GPS).坐标式测量设备(CMM)的验收和复检试验.带单针和多触针探测系统的坐标测量机(CMMs)
英文标准名称：Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). CMMs using single and multiple stylus contacting probing systems
标准类型：N13
发布日期：2010/11/30 12:00:00
实施日期：2010/11/30 12:00:00
中国标准分类号：N13
国际标准分类号：17.040.30
适用范围：This part of ISO 10360 specifies acceptance and periodic reverification tests of CMM performance withcontacting probing systems and is only applicable to CMMs using? any type of contacting probing system,? a discrete point probing mode, and? spherical or hemispherical stylus tip(s).It complements ISO 10360-7, which is the module for CMMs with video probing systems, and ISO 10360-2,which is universal, i.e. not probe-type specific.NOTE It is the CMM probing performance tests which are specified by the maximum permissible errors (MPEs), dueto the impracticality of isolating the performance of the probing system from that of the CMM, even on a small artefactsuch as a test sphere.This part of ISO 10360 applies to CMMs supplied with any of the following:a) single-stylus probing system;b) multi-stylus probing systems with fixed multiple styli attached to a single probe (e.g. “star” stylus);c) multiple probing systems such as those with a stylus for each of their probes;d) systems with articulating probing;e) stylus and probe changing systems;f) manual (non-driven) CMMs.This part of ISO 10360 is not applicable to non-contacting probing systems, which require different testingprocedures.The terms “multi-stylus size error”, etc., should strictly be written “combined CMM and multi-stylus probingsystemsize error”, etc. For convenience, the wording has been truncated.If it is desired to isolate the probing-system performance as far as is practical, the influence of the CMM canbe minimized. See Annex C for more information.