DIN EN 14637-2008 建筑五金件.防火/防烟门组件用电气控制开放系统.要求、试验方法、应用及维修

标准号：DIN EN 14637-2008
中文标准名称：建筑五金件.防火/防烟门组件用电气控制开放系统.要求、试验方法、应用及维修
英文标准名称：Building hardware - Electrically controlled hold-open systems for fire/smoke door assemblies - Requirements, test methods, application and maintenance;English version of DIN EN 14637:2008-01
标准类型：Y71
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：Y71
国际标准分类号：91.060.50;91.190
引用标准：EN 54-1-1996;EN 54-2-1997;EN 54-2/AC-1999;EN 54-4-1997;EN 54-4/AC-1999;EN 54-4/A1-2002;EN 54-5/A1-2002;EN 54-5-2000;EN 54-7/A1-2002;EN 54-7-2000;CEN/TS 54-14-2004;EN 1155-1997;EN 1155/A1-2002;EN 1191;EN 1670-1998;EN 12605;prEN 20650-1;EN 12798;EN 60068-1
适用范围：This part of EN 14511 specifies minimum requirements which ensure that air conditioners, heat pumps and liquidchilling packages with electrical driven compressors are fit for the use designated by the manufacturer when usedfor space heating and/or cooling.This European Standard applies to factory-made units that can be ducted.This standard applies to factory-made liquid chilling packages with integral condensers or for use with remotecondensers.This standard applies to factory-made units of either fixed capacity or variable capacity by any means.Packaged units, single split and multisplit systems are covered by this standard. Single duct and double duct unitsare covered by the standard.In the case of units consisting of several parts, the standard applies only to those designed and supplied as acomplete package, except for liquid chilling packages with remote condenser. OThis standard is primarily intended for water and brine chilling packages but can be used for cooling any otherliquid subject to agreement.This standard applies to air-to-air air conditioners which evaporate the condensate on the condenser side.The units having their condenser cooled by air and by the evaporation of external additional water are notcovered by this standard.This standard does not apply to units using transcritical cycles, e.g. with CO2 as refrigerant.Installations used for heating and/or cooling of industrial processes are not within the scope of this standard.NOTE Part load testing of units is dealt with in CEN/TS 14825.