BS EN 61076-4-111-2002 电子设备的连接器.质量评定的印制板.印制板及底板用网格为2.5 mm的、符合IEC 60917-1规定的两件式连接器组件的详细规范

标准号：BS EN 61076-4-111-2002
中文标准名称：电子设备的连接器.质量评定的印制板.印制板及底板用网格为2.5 mm的、符合IEC 60917-1规定的两件式连接器组件的详细规范
英文标准名称：Connectors for electronic equipment - Printed board connectors with assessed quality - Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm in accordan
标准类型：L23
发布日期：2002/8/16 12:00:00
实施日期：2002/8/16 12:00:00
中国标准分类号：L23
国际标准分类号：31.220.10
适用范围：Connectors for electronic equipment ? Part 4-111: Printed board connectors with assessed quality ?Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 nm in accordance with IEC 60917-1 1 General data 1.1 Recommended method of mounting 1.1.1 Number of contacts 1.2 Ratings and characteristics 1.3 Normative references 1.4 Marking 1.5 IEC type designation 1.6 Ordering information 2 Technical information 2.1 Definitions 2.2 Survey of styles and variants 2.3 Information on application 2.3.1 Complete connectors (pairs) 2.3.2 Fixed board connectors 2.3.3 Free board connectors 2.4 Contact arrangements 3 Drawings and dimensions 3.1 General 3.2 Isometric view and common features 3.2.1 Common features 3.2.2 Reference system 3.2.3 Height dimensions 3.2.4 Width dimensions 3.2.5 Depth dimensions 3.3 Mating information 3.3.1 Electrical engagement length 3.3.2 Perpendicular to engaging direction 3.3.3 Inclination 3.4 Fixed board connectors 3.4.1 Dimensions 3.4.2 Terminations 3.4.3 Dimensions of contacts 3.5 Free board connectors 3.5.1 Dimension 3.5.2 Terminations 3.5.3 Dimensions of contacts 3.6 Accessories 3.7 Mounting information for fixed board connectors 3.7.1 Hole pattern on backplane 3.8 Mounting information for free board connectors 3.8.1 Hole pattern on printed boards 3.9 Gauges 3.9.1 Sizing gauge and retention force gauge 4 Characteristics 4.1 Climatic category 4.2 Electrical 4.2.1 Creepage and clearance distances 4.2.2 Voltage proof 4.2.3 Current-carrying capacity 4.2.4 Contact resistance 4.2.5 Insulation resistance 4.3 Mechanical 4.3.1 Mechanical operation 4.3.2 Engaging and separating forces 4.3.3 Contact retention in insert 4.3.4 Polarizing method 4.3.5 Gauge retention force 5 Test schedule 5.1 General 5.1.1 Arrangement for contact resistance measurement 5.1.2 Arrangement for dynamic stress tests 5.1.3 Arrangement for static load, axial 5.1.4 Wiring of specimens 5.1.5 Arrangement for flammability test 5.1.6 Arrangement to measure the holding force of the connector housing on the PC board 5.2 Test schedule tables 5.2.1 Basic test schedule 5.2.2 Full test schedule 6 Quality assessment procedures 6.1 Qualification approval testing 6.1.1 Method 1 6.2 Quality conformance inspection 6.2.1 Lot-by-lot tests 6.2.2 Periodic tests 6.3 Delayed delivery, re-inspection Annex A (normative) Requirements for application to mechanical structures A.1 Scope A.2 Requirement for use of connectors A.3 Dimensions to be given by the detail specification A.3.1 Metric mechanical structures - IEC 60917-1 Annex ZA (normative) Normative references to international publications with their corresponding European publications