BS EN ISO 868-2003 塑料和硬质橡胶.用硬度计测定压痕硬度(肖氏硬度)

标准号：BS EN ISO 868-2003
中文标准名称：塑料和硬质橡胶.用硬度计测定压痕硬度(肖氏硬度)
英文标准名称：Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
标准类型：G30
发布日期：2003/4/25 12:00:00
实施日期：2003/4/25 12:00:00
中国标准分类号：G30
国际标准分类号：83.060;83.080.01
适用范围：1.1 This International Standard specifies a method for the determination of the indentation hardness of plastics andebonite by means of durometers of two types: type A is used for softer materials and type D for harder materials (seethe Note to 8.2). The method permits measurement either of the initial indentation or of the indentation after aspecified period of time, or both.NOTE The durometers and the methods specified in this International Standard are referred to as type A Shore and type DShore durometers and durometer methods, respectively.1.2 This method is an empirical method intended primarily for control purposes. No simple relationship existsbetween indentation hardness determined by this method and any fundamental property of the material tested. Forspecification purposes, it is recommended that ISO 48, Rubber, vulcanized or thermoplastic — Determination ofhardness (hardness between 10 IRHD and 100 IRHD), be used for the softer materials.