ISO 13318-3-2004 用离心液体沉积法测定粒度分布.第3部分:离心X射线法

标准号：ISO 13318-3-2004
中文标准名称：用离心液体沉积法测定粒度分布.第3部分:离心X射线法
英文标准名称：Determination of particle size distribution by centrifugal liquid sedimentation methods - Part 3: Centrifugal X-ray method
标准类型：N51
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：N51
国际标准分类号：19.120
适用范围：This part of ISO 13318 describes a method for determining the particle size distribution of homogeneous particulate material using centrifugal sedimentation in a liquid. Solids concentrations are determined by the attenuation of an X-ray beam. The resulting signal enables conversion to a particle size distribution. The method of determining the particle size distribution described in this standard is applicable to powders which can be dispersed in liquids or powders which are present in slurry form. The typical particle size range for analysis is from 0,1 μm to 5 μm. The method is applicable to powders in which all particles have the same effective density, chemical composition and comparable shapes. Materials possessing elements with an atomic number greater than about 12 can be expected to produce adequate X-ray opacity. Particles should not undergo chemical or physical change in the suspension liquid. It is necessary that the particles have a higher density than that of the liquid.