DIN SPEC 1145-2010 道路和机场表面特征.第5部分:带纵向控制滑动装置用公路表面的防滑测定用程序(LFCRDK):ROAR(道路分析器和Norsemeter记录器)

标准号：DIN SPEC 1145-2010
中文标准名称：道路和机场表面特征.第5部分:带纵向控制滑动装置用公路表面的防滑测定用程序(LFCRDK):ROAR(道路分析器和Norsemeter记录器)
英文标准名称：Road and airfield surface characteristics - Part 5: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCRDK): ROAR (Road Analyser and Recorder of Norsemeter); German version CEN/TS 15901
标准类型：P68
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：P68
国际标准分类号：93.080.20;93.120
引用标准：EN ISO 13473-1;ISO 13473-2
适用范围：This Technical Specification describes a method for determining the skid resistance of a surface by measurement of the longitudinal friction coefficient LFCN. The method provides a measure of the wet skid resistance properties of a bound surface by measurement of the longitudinal friction coefficient using a continuous reading braked wheel fixed-slip device. The test tyre is dragged over a pre-wetted pavement under controlled speed conditions while the test tyre is parallel to the direction of motion and perpendicular to the pavement. This Technical Specification covers the operation of the Road Analyser and Recorder of Norsemeter (ROAR). The fixed slip ratio is 20 %. A machine conforming to the general characteristics of the ROAR and the specific provisions of this Technical Specification may also be used for the tests. In addition to friction measurements, to determine the macro texture of the pavement surface a laser system is used. This system is placed in front of the towing vehicle in order to measure the macro texture (mean profile depth - MPD) on dry pavements and on the same path as the skid resistance measurement is done. The standard for this measurement and the device is described in EN ISO 13473-1. The skid resistance of a pavement is determined by friction measurements and measurements of pavement texture. The skid resistance may be reported either as friction measurement or as a combination of friction and texture measurements.