BS EN 60393-1-2009 电子设备用电位器.通用规范
百检网 2021-07-15
标准号:BS EN 60393-1-2009
中文标准名称:电子设备用电位器.通用规范
英文标准名称:Potentiometers for use in electronic equipment - Generic specification
标准类型:L14
发布日期:2009/9/30 12:00:00
实施日期:2009/9/30 12:00:00
中国标准分类号:L14
国际标准分类号:31.040.20
引用标准:IEC 60027-1;IEC 60050;IEC 60062;IEC 60063-1963;IEC 60063 AMD 1-1967;IEC 60063 AMD 2-1977;IEC 60068-1-1988;IEC 60068-1 AMD 1-1992;IEC 60068-2-1 AMD 1-1983;IEC 60068-1 AMD 1-1994;IEC 60068-2-1-1990;IEC 60068-2-2-1974;IEC 60068-2-2 AMD 1-1993;IEC 60068-2-2 A
适用范围:This part of IEC 60393 is applicable to all types of resistive potentiometers, including leadscrewactuated types, presets, multi-turn units, etc. to be used in electronic equipment.It establishes standard terms, inspection procedures and methods of test for use in sectionaland detail specifications of electronic components for quality assessment or any otherpurpose.It has been mainly written, and the test methods described, to conform to the widely usedsingle-turn rotary potentiometer with an operating shaft.For other types of potentiometers:• the angle of rotation may be several turns;• the reference to an operating shaft shall apply to any other actuating device;• the angular rotation shall be taken to mean mechanical travel of the actuating device;• a value for force shall be prescribed instead of a value for torque if the actuating devicemoves in a linear instead of a rotary manner.These alternative prescriptions will be found in the sectional or detail specification.When a component is constructed as a variable resistor, i.e. as a two-terminal device, thedetail specification shall prescribe the modifications required in the standard tests.
百检能给您带来哪些改变?
1、检测行业全覆盖,满足不同的检测;
2、实验室全覆盖,就近分配本地化检测;
3、工程师一对一服务,让检测更精准;
4、免费初检,初检不收取检测费用;
5、自助下单 快递免费上门取样;
6、周期短,费用低,服务周到;
7、拥有CMA、CNAS、CAL等权威资质;
8、检测报告权威有效、中国通用;