BS EN 60146-1-1-2010 半导体变流器.总要求和线路整流转换器.第1-1部分:基本要求规范

标准号：BS EN 60146-1-1-2010
中文标准名称：半导体变流器.总要求和线路整流转换器.第1-1部分:基本要求规范
英文标准名称：Semiconductor converters. General requirements and line commutated converters. Part 1-1: Specification of basic requirements
标准类型：K46
发布日期：2010/8/31 12:00:00
实施日期：2010/8/31 12:00:00
中国标准分类号：K46
国际标准分类号：29.045;29.200
适用范围：This International Standard specifies the requirements for the performance of allsemiconductor power converters and semiconductor power switches using controllable and/ornon-controllable electronic valve devices.The electronic valve devices mainly comprise semiconductor devices, either not controllable(i.e. rectifier diodes) or controllable (i.e. thyristors, triacs, turn-off thyristors and powertransistors). The controllable devices may be reverse blocking or reverse conducting andcontrolled by means of current, voltage or light. Non-bistable devices are assumed to beoperated in the switched mode.This standard is primarily intended to specify the basic requirements for converters in generaland the requirements applicable to line commutated converters for conversion of a.c. power tod.c. power or vice versa. Parts of this standard are also applicable to other types of electronicpower converter provided that they do not have their own product standards.These specific equipment requirements are applicable to semiconductor power convertersthat either implement power conversion or use commutation (for example semiconductor selfcommutatedconverters) or involve particular applications (for example semiconductorconverters for d.c. motor drives) or include a combination of said characteristics (for exampledirect d.c. converters for electric rolling stock).This standard is applicable to all power converters not covered by a dedicated productstandard, or if special features are not covered by the dedicated product standard. Dedicatedproduct standards for power converters should refer to this International Standard.NOTE 1 This standard is not intended to define EMC requirements. It covers all phenomena and thereforeintroduces references to dedicated standards which are applicable according to their scope.NOTE 2 A large part of this standard, particularly for power transformers, is covered in IEC 61378-1.