BS EN 14276-2-2007+A1-2011 制冷系统和热泵用压力设备.管道系统.一般要求

标准号：BS EN 14276-2-2007+A1-2011
中文标准名称：制冷系统和热泵用压力设备.管道系统.一般要求
英文标准名称：Pressure equipment for refrigerating systems and heat pumps. Piping. General requirements
标准类型：Q76;J74
发布日期：2007/8/31 12:00:00
实施日期：2007/8/31 12:00:00
中国标准分类号：Q76;J74
国际标准分类号：23.020.30;27.080;27.200
引用标准：EN 378-1-2008+A1-2010;EN 378-2-2008+A1-2009;EN 378-3-2008;EN 378-4-2008;EN 571-1-1997;EN 583-4-2002;EN 764-1-2004;EN 764-2-2002;EN 764-3-2002;EN 764-4-2002;EN 764-5-2002;EN 970-1997;EN 1289-1998;EN 1435-1997;EN 1653-1997;EN 1712-1997;EN 1714-1997;EN 10204
适用范围：1.1 This European Standard specifies the requirements for material, design, manufacturing, testing anddocumentation for stationary piping intended for use in refrigerating systems, heat pumps and secondarycooling and heating systems. These refrigerating systems and heat pump systems are referenced in thisstandard as refrigerating systems as defined in EN 378-1.1.2 This European Standard applies to piping including welded or brazed attachments up to and includingthe flanges, screwed, welded or brazed connectors or to the edge to be welded or brazed at the firstcircumferential joint connecting piping or other elements.1.3 This European Standard applies to the selection, application and installation of safety accessoriesintended to protect the piping during the various phases of the refrigeration cycle.1.4 This European Standard applies to the following piping: heat exchanger consisting of piping for the purpose of cooling or heating air where piping aspects arepredominant; piping incorporated into an assembly (e.g. self contained system, condensing unit); field erected piping.1.5 This European Standard applies to piping with an internal pressure down to – 1 bar, to account for theevacuation of the piping prior to charging with refrigerant.1.6 This European Standard applies to both the mechanical loading conditions and thermal conditions asdefined in EN 13480-3 associated with refrigerating systems. It applies to piping subject to the maximumallowable temperatures for which nominal design stresses for materials are derived usingEN 14276-1:2006+A1 or as specified in this European Standard. In addition piping designed to thisstandard needs to have a maximum design temperature not exceeding 200 °C and a maximum designpressure not exceeding 64 bar. Outside of these limits, EN 13480 should be used for the design constructionand inspection of the piping. Under these circumstances the unique nature of a refrigerating plant, asindicated in the introduction of EN 14276-1:2006+A1, needs also to be taken into account.1.7 This European Standard applies to piping where the main pressure bearing parts are manufacturedfrom metallic ductile materials as defined in Clause 4 and in EN 14276-1:2006+A1.