BS EN 62271-3-2006 高压开关装置和控制装置.基于IEC 61850的数字接口

标准号：BS EN 62271-3-2006
中文标准名称：高压开关装置和控制装置.基于IEC 61850的数字接口
英文标准名称：High-voltage switchgear and controlgear - Digital interfaces based on IEC 61850
标准类型：K43
发布日期：2006/12/29 12:00:00
实施日期：2006/12/29 12:00:00
中国标准分类号：K43
国际标准分类号：29.130.10
引用标准：IEC 60050-191-1990;IEC 60265-2;IEC 60694;IEC 60794-2001;IEC 60870-4-1990
适用范围：This International Standard is applicable to high-voltage switchgear and controlgear (scope ofIEC SC 17A) and assemblies thereof (scope of IEC SC 17C) and specifies equipment fordigital communication with other parts of the substation and its impact on testing. Thisequipment for digital communication, replacing metal parallel wiring, can be integrated intothe high-voltage switchgear, controlgear, and assemblies thereof, or can be an externalequipment in order to provide compliance for existing switchgear and controlgear andassemblies thereof with the standards of the IEC 61850 series.This International Standard is a product standard based on the IEC 61850 series. It deals withall relevant aspects of switchgear and controlgear, and assemblies thereof with a serialcommunication interface according to the IEC 61850 series. In particular it defines:a) A selection of the information models from the IEC 61850 series that shall be supportedby such switchgear and controlgear, and assemblies thereof.b) Conformance classes for the set of communication services that shall be supported by theswitchgear and controlgear, and assemblies thereof.c) Modifications and extensions to type and routine tests of switchgear and controlgear, andassemblies thereof that are required due to the serial communication interface.d) An extension of the IEC 61850 series’ object model for switchgear monitoring.NOTE 1 It is intended to integrate the extension of the IEC 61850 series’ object model for switchgear monitoringinto a further revision of the IEC 61850 series. Once this integration is completed, the relevant parts will beremoved from this standard.The document is based on the IEC 61850 series, the horizontal standard series forcommunication, and specifies the requirements for digital communication equipment usedwithin high-voltage switchgear, controlgear, and assemblies thereof, as well as the relevanttesting requirements.The relevant switchgear standards of the IEC 62271 series are applicable in general, with the additional specifications described in this standard.NOTE 2 There is a limited activity today concerning switchgear with digital interface for rated voltage levels less than, or equal to, 52 kV. Such switchgear usually does not have integrated digital communication interfaces. If such products are to be developed, this should be done in accordance with the present standard.NOTE 3 This standard intends to promote interoperability of communication interfaces. Interchangeability is outside the scope of this standard, as there is no requirement for it. Interchangeability is also outside the scope of the IEC 61850 series.NOTE 4 For an introduction to substation communication and the related terms, definitions and models, refer to IEC 61850-1 which provides an overview of the objectives and requirements of the IEC 61850 series in general.IEC 61850-7-1 provides an overview of modelling techniques.