SAE AMS 5860F-2006 多重熔化的溶液热处理和沉淀可硬化的耐腐蚀钢片材带材和板材12Cr 8.5Ni 0.30Cb 2.0Cu 1.1Ti

标准号：SAE AMS 5860F-2006
中文标准名称：多重熔化的溶液热处理和沉淀可硬化的耐腐蚀钢片材带材和板材12Cr 8.5Ni 0.30Cb 2.0Cu 1.1Ti
英文标准名称：Steel, Corrosion Resistant, Sheet, Strip, and Plate 12Cr - 8.5Ni - 0.30Cb - 1.1Ti - 2.0Cu Multiple Melted, Solution Heat Treated, Precipitation Hardenable UNS S45500
标准类型：V11
发布日期：2006/6/1 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：V11
国际标准分类号：49.025.10
引用标准：ASTM A 370-2005;ASTM A 370-2006;ASTM A 480/A 480M-2006;ASTM E 353-1993;SAE AMS 2242F-2001;SAE AMS 2248F-2006;SAE AMS 2300K-2003;SAE AMS 2371G-2003;SAE AMS 2807-1991;SAE ARP 1110B-2006;SAE AS 4194-1991
适用范围：This specification covers a corrosion and moderate heat resistant steel in the form of sheet, strip, and plate. These products have been used typically for parts requiring corrosion resistance and high strength in service up to 800 °F (427 °C). The steel can be precipitation hardened to minimum tensile strengths up to 225,000 psi (1551 MPa). Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking after heat treatment. ARP 1110 recommends practices to minimize such conditions.