ISO 7170-2005 家具.储物柜.强度和耐久性的测定

标准号：ISO 7170-2005
中文标准名称：家具.储物柜.强度和耐久性的测定
英文标准名称：Furniture - Storage units - Determination of strength and durability
标准类型：Y80
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：Y80
国际标准分类号：97.140
适用范围：This International Standard specifies test methods for determining the strength and durability of storage unitsthat are fully assembled and ready for use, including their movable and non-movable parts.The tests consist of the application, to various parts of the unit, of loads, forces and velocities simulating normalfunctional use, as well as misuse, that might reasonably be expected to occur.With the exception of the sustained load tests in Clause 6, the tests are designed to evaluate properties withoutregard to materials, design/construction or manufacturing processes.The test results are only valid for the unit/component tested. These results may be used to represent theperformance of production models provided that the tested model is representative of the production model.Tests carried out according to this International Standard are intended to demonstrate the ability of the item togive satisfactory service in its intended environment. The tests have been developed for units/components thathave not been in use. However, when properly justified, they may be used for fault investigation.The strength and durability tests do not assess the structure of the building, e.g. the strength of wall hangingcabinets includes only the cabinet and the parts used for the attachment. The wall and the attachment into thewall are not included.Assessment of ageing and degradation is not included.This International Standard specifies test methods only. It does not specify requirements. These should bespecified in a requirements document. If this is not available, suggested loads and cycles can be found inAnnex A.Annex B describes two apparatuses used for slam-shut and slam-open tests of extension elements.