BS EN 10253-1-1999 对接焊管道接头.通用和无特殊检验要求的锻制碳钢

标准号：BS EN 10253-1-1999
中文标准名称：对接焊管道接头.通用和无特殊检验要求的锻制碳钢
英文标准名称：Butt-welding pipe fittings - Wrought carbon steel for general use and without specific inspection requirements
标准类型：J15
发布日期：1999/12/15 12:00:00
实施日期：1999/12/15 12:00:00
中国标准分类号：J15
国际标准分类号：23.040.40;77.140.45
适用范围：1 Scope This European Standard specifies requirements for steel butt-welding fittings (elbows and return bends, concentric and eccentric reducers, equal and reducing tees, dished ends and caps) made of wrought carbon steel and delivered without specific inspection. The fittings described in this European Standard do not fulfil specific design requirements ; consequently they cannot be considered as conforming to the Essential Requirements of the Pressure Equipment Directive (Directive 97/23/EC of 29.05.1997). It specifies: — the steel grade and its chemical composition ; — the mechanical characteristics ; — the dimensions and tolerances ; — the technical conditions for inspection and testing ; — the marking, packaging and inspection documents. When steel grade S265 is specified in 4.1.2, the normative annex A applies and takes preference over conflicting requirements in the relevant areas of the main text. Another part of this European Standard (describing fittings intended to fulfil the Essential Requirements of the PED) is: — Butt-welding pipe fittings - Part 2 : Wrought carbon and ferritic alloy steels with specific inspection requirements. 2 Limitation of use The allowed pressures and temperatures are the responsibility of the customer according to the state of the art and in application of the safety coefficients specified in the applicable regulations, codes or standards. 3 Technical delivery conditions Unless otherwise specified in this European Standard the general technical delivery conditions specified in EN 10021 apply.