BS EN ISO 10893-10-2011 钢管的无损检测.横向和/或纵向缺陷探测用无缝和焊接(埋弧焊除外)钢管的自动全周界超声波检验

标准号：BS EN ISO 10893-10-2011
中文标准名称：钢管的无损检测.横向和/或纵向缺陷探测用无缝和焊接(埋弧焊除外)钢管的自动全周界超声波检验
英文标准名称：Non-destructive testing of steel tubes. Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections
标准类型：H26
发布日期：2011/4/30 12:00:00
实施日期：2011/4/30 12:00:00
中国标准分类号：H26
国际标准分类号：23.040.10;77.040.20;77.140.75
引用标准：ISO 5577;ISO 9712;ISO 11484
适用范围：This part of ISO 10893 specifies requirements for automated full peripheral ultrasonic shear wave (generatedby conventional or phased array technique) testing of seamless and welded [except submerged arc-welded(SAW)] steel tubes, for the detection of longitudinal and/or transverse imperfections.Unless otherwise specified in the purchase order, the testing method is applicable to the detection ofpredominantly longitudinal imperfections.In the case of testing on longitudinal imperfections, Lamb wave testing can be applied at the discretion of themanufacturer.For seamless tubes, by agreement between the purchaser and manufacturer, testing principles of this part ofISO 10893 can be applied to detect imperfections having other orientations.This part of ISO 10893 is applicable to the inspection of tubes with an outside diameter greater than or equalto 10 mm, normally with an outside diameter-to-thickness ratio greater than or equal to 5.This part of ISO 10893 can also be applicable to the testing of circular hollow sections.NOTE For options for testing tubes with an outside diameter-to-thickness ratio less than 5 on longitudinalimperfections, see Annex A.