ISO 7391-1-2006 塑料.聚碳酸酯模塑和挤塑材料.第1部分:命名体系和基本规范

标准号：ISO 7391-1-2006
中文标准名称：塑料.聚碳酸酯模塑和挤塑材料.第1部分:命名体系和基本规范
英文标准名称：Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1: Designation system and basis for specifications
标准类型：G32
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：G32
国际标准分类号：83.080.20
引用标准：ISO 1043-1;ISO 7391-2
适用范围：1.1 This part of ISO 7391 establishes a system of designation for polycarbonate thermoplastic material, which may be used as the basis for specifications.1.2 The types of polycarbonate plastic are differentiated from each other by a classification system based on appropriate levels of the designatory propertiesa) viscosity number;b) melt volume-flow rate;c) Charpy impact strength;and on information about the intended application and/or method of processing, important properties, additives, colorants, fillers and reinforcing materials.1.3 This part of ISO 7391 is applicable to thermoplastic polyesters of carbonic acid and aromatic dihydroxy compounds. The polyester may be a homopolymer, a copolymer or a mixture of the two.It applies to materials ready for normal use in the form of powder, granules or pellets and to materials unmodified or modified by colorants, additives, fillers, etc.1.4 It is not intended to imply that materials having the same designation give necessarily the same performance. This part of ISO 7391 does not provide engineering data, performance data or data on processing conditions which may be required to specify a material for a particular application and/or method of processing.If such additional properties are required, they shall be determined in accordance with the test methods specified in Part 2 of this International Standard, if suitable.1.5 In order to specify a thermoplastic material for a particular application or to ensure reproducible processing, additional requirements may be given in data block 5 (see 3.1).