IEC 62127-2 Edition 1.2-2017 超音波学.水听器.第2部分:超音波场小于40 MHz的校准

标准号：IEC 62127-2 Edition 1.2-2017
中文标准名称：超音波学.水听器.第2部分:超音波场小于40 MHz的校准
英文标准名称：Ultrasonics - Hydrophones - Part 2: Calibration for ultrasonic fields up to 40 MHz
标准类型：L31
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：L31
国际标准分类号：11.040.60;17.140.50
引用标准：IEC 60050-801-1994;IEC 60565-2006;IEC 61161-2013;IEC 61689-2013;IEC 61828-2006;IEC 62127-1-2007;IEC 62127-3-2007
适用范围：This part of IEC 62127 specifies: absolute hydrophone calibration methods; relative (comparative) hydrophone calibration methods. Recommendations and references to accepted literature are made for the various relative and absolute calibration methods in the frequency range covered by this standard. This standard is applicable to; hydrophones used for measurements made in water and in the ultrasonic frequency range up to 40 MHz; NOTE 1 Although some physiotherapy medical applications of medical ultrasound are developing which operate in the frequency range 40 kHz to 100 kHz, the primary frequency range of diagnostic imaging remains above 2 MHz. It has recently been established that, even in the latter case, the hydrophone response at substantially lower frequencies can influence measurements made of key acoustic parameters [1]; hydrophones employing circular piezoelectric sensor elements, designed to measure the pulsed wave and continuous wave ultrasonic fields generated by ultrasonic equipment; NOTE 2 Some hydrophones can have non-circular active elements, arising from slight deviations from a circular structure caused, for example by electrode structure, or conversely, the active elements can actually be squares. The clauses within this standard remain valid, although, in these cases, special attention should be paid to the directional response and to the effective radii of the active element through various axes of rotation; hydrophones with or without a hydrophone pre-amplifier.