BS EN 14294-2010 皮革和鞋类材料用粘合剂.由模压工序粘合试件的制备

标准号：BS EN 14294-2010
中文标准名称：皮革和鞋类材料用粘合剂.由模压工序粘合试件的制备
英文标准名称：Adhesives for leather and footwear materials - Preparation of bonded test pieces by moulding-on processes
标准类型：G38
发布日期：2010/4/30 12:00:00
实施日期：2010/4/30 12:00:00
中国标准分类号：G38
国际标准分类号：61.060;83.180
适用范围：This European Standard specifies procedures for the preparation of test pieces comprising adhesive coated leatheror other footwear upper material onto which a soling material is moulded directly. The procedures described simulatedirect vulcanising of rubber, injection moulding of thermoplastics and reaction moulding of polyurethane.The prepared test pieces are suitable for the test procedures described in EN 1392, to meet the requirements ofEN 15307.SAFETY STATEMENT— Persons using this document should be familiar with the normal laboratory practice, ifapplicable. This document does not purport to address all of the safety problems, if any, associated with its use. It isthe responsibility of the user to establish appropriate safety and health practices and to ensure compliance with anyregulatory conditions.ENVIRONMENTAL STATEMENT— It is understood that some of the material permitted in this standard may havenegative environmental impact. As technological advantages lead to acceptable alternatives for these materials, theywill be eliminated from this standard to the extent possible.At the end of the test, the user of the standard should take care to carry out an appropriate disposal of the wastes,according to local regulation.