BS EN 1993-1-7-2007 欧洲法规 3.钢结构的设计.受平面承载以外的电镀结构

标准号：BS EN 1993-1-7-2007
中文标准名称：欧洲法规 3.钢结构的设计.受平面承载以外的电镀结构
英文标准名称：Eurocode 3. Design of steel structures - Plated structures subject to out of plane loading
标准类型：P26
发布日期：2007/7/31 12:00:00
实施日期：2007/7/31 12:00:00
中国标准分类号：P26
国际标准分类号：91.010.30;91.080.10
引用标准：EN 1993 Eurocode 3;EN 1993 Part 1.1;EN 1993 Part 1.3;EN 1993 Part 1.4;EN 1993 Part 1.5;EN 1993 Part 1.6;EN 1993 Part 1.8;EN 1993 Part 1.9;EN 1993 Part 1.10;EN 1993 Part 1.12;EN 1993 Part 4.1;EN 1993 Part 4.2
适用范围：(1)P EN 1993-1-7 provides basic design rules for the structural design of unstiffened and stiffened plateswhich form part of plated structures such as silos, tanks or containers, that are loaded by out of plane actions.It is intended to be used in conjunction with EN 1993-1-1 and the relevant application standards.(2) This document defines the design values of the resistances: the partial factor for resistances may betaken from National Annexes of the relevant application standards. Recommended values are given in therelevant application standards.(3) This Standard is concerned with the requirements for design against the ultimate limit state of:– plastic collapse;– cyclic plasticity;– buckling;– fatigue.(4) Overall equilibrium of the structure (sliding, uplifting, overturning) is not included in this Standard,but is treated in EN 1993-1-1. Special considerations for specific applications may be found in the relevantapplications parts of EN 1993.(5) The rules in this Standard refer to plate segments in plated structures which may be stiffened orunstiffened. These plate segments may be individual plates or parts of a plated structure. They are loaded byout of plane actions.(6) For the verification of unstiffened and stiffened plated structures loaded only by in-plane effects seeEN 1993-1-5. In EN 1993-1-7 rules for the interaction between the effects of inplane and out of planeloading are given.(7) For the design rules for cold formed members and sheeting see EN 1993-1-3.(8) The temperature range within which the rules of this Standard are allowed to be applied are defined inthe relevant application parts of EN 1993.(9) The rules in this Standard refer to structures constructed in compliance with the executionspecification of EN 1090-2.(10) Wind loading and bulk solids flow should be treated as quasi-static actions. For fatigue, the dynamiceffects must be taken into account according to EN 1993-1-9. The stress resultants arising from the dynamicbehaviour are treated in this part as quasi-static.