ISO/TR 22335-2007 表面化学分析.深度剖面.溅射速率测量:使用机械光针式轮廓仪的网眼复制法

标准号：ISO/TR 22335-2007
中文标准名称：表面化学分析.深度剖面.溅射速率测量:使用机械光针式轮廓仪的网眼复制法
英文标准名称：Surface chemical analysis - Depth profiling - Measurement of sputtering rate: mesh-replica method using a mechanical stylus profilometer
标准类型：A43
发布日期：2007/7/1 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：A43
国际标准分类号：71.040.40
适用范围：This Technical Report describes a method for determining ion-sputtering rates for depth profilingmeasurements with Auger electron spectroscopy (AES) and X-ray photoelectron spectroscopy (XPS) wherethe specimen is ion-sputtered over a region with an area between 0,4 mm2 and 3,0 mm2. This TechnicalReport is applicable only to a laterally homogeneous bulk or single-layered material where the ion-sputteringrate is determined from the sputtered depth, as measured by a mechanical stylus profilometer, and sputteringtime.This Technical Report provides a method to convert the ion-sputtering time scale to sputtered depth in a depthprofile by assuming a constant sputtering velocity. This method has not been designed for, or tested using, ascanning probe microscope system. It is not applicable to the case where the sputtered area is less than0,4 mm2 or where the sputter-induced surface roughness is significant compared with the sputtered depth tobe measured