BS 1202-1-2002 钉子规范.钢钉

标准号：BS 1202-1-2002
中文标准名称：钉子规范.钢钉
英文标准名称：Specification for nails - Steel nails
标准类型：Y72;J13
发布日期：2002/2/7 12:00:00
实施日期：2002/2/7 12:00:00
中国标准分类号：Y72;J13
国际标准分类号：21.060.50
适用范围：1 This part of the standard specifies requirements, including dimensions and finish, for the types of steel nails listed in 1.1 and 1.1.2. NOTE The nearest former s.w.g. numbers are included in a separate column in each table for convenience only. They do not form part of the specification. 1.1 Wire nails 1) Convex head roofing nails (chisel or diamond points) 2) Pipe nails (chisel point) 3) Hardboard panel pins (round shank) 4) Hardboard panel pins (square shank) 5) Lath nails 6) Plasterboard nails (jagged shank) 7) Tile pegs 8) Tram nails with flat or raised head with chisel point 9) Square twisted shank flat head nails 10) Dowels 11) Tenter hooks 12) Annular ringed shank flat head nails 13) Helical threaded shank flat head nails 14) Duplex head nails 1.2 Cut nails 1) Cut clasp nails 2) Cut floor brads 2 The types of nail are illustrated in the diagrams accompanying Table 1, Table 2, Table 3, Table 4, Table 5, Table 6, Table 7, Table 8, Table 9, Table 10, Table 11, Table 12, Table 13, Table 14, Table 15 and Table 16. NOTE Requirements for the following nails, which were previously included in this British Standard, are given in BS EN 10230-1. 1) Round plain head nails 2) Round lost head nails 3) Clout or slate nails 4) Extra large head clout or felt nails 5) Panel pins 6) Oval brad head nails 7) Oval lost head nails 8) Spring head twisted shank nails 9) Washer head slab nails