DIN EN 12693-2008 制冷设备和热泵.安全性和环境要求.容积式制冷压缩机

百检网 2021-08-03
标准号:DIN EN 12693-2008
中文标准名称:制冷设备和热泵.安全性和环境要求.容积式制冷压缩机
英文标准名称:Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors; English version of DIN EN 12693:2008-09
标准类型:J72
发布日期:1999/12/31 12:00:00
实施日期:2008/9/1 12:00:00
中国标准分类号:J72
国际标准分类号:23.140
引用标准:EN 287-1;EN 294;EN 378-1-2008;EN 378-2-2008;EN 378-3;EN 378-4;EN 837-1;EN 837-3;EN 953;EN 1050;EN 1515;EN 1563;EN 1779;EN 10045-1;EN 10204;EN 12178;EN 12516-2;EN 13136-2001;EN 13445-2-2002;EN 13445-3;EN 20898;EN 60034-1-2004;EN 60204-1-2006;EN 60335-2-34
适用范围:This standard applies to positive displacement refrigerant compressors for stationary and mobile refrigeratingsystems and heat pumps defined in 3.1, hereafter called compressors. It applies for compressors used in commercial and industrial appliances and with electrical energy supplyincluding integral motors, up to 1 000 VAC and 1 500 VDC.It applies to open drive, semi hermetic and hermetic motor compressors, which contain a positivecompression function.This standard is not applicable to:-- compressors used in household appliance for which EN 60335-2-34 applies;-- compressors using water or air as refrigerant.This standard does not deal with requirements for vibration and noise.NOTE I Compressors for automotive comfort air conditioning systems can be developed according e.g. SAE J 639.NOTE 2 Noise emission depends on the complete installation of the built-in compressors and the correspondingoperating conditions. For semi-hermetic and open drive compressors which include moving parts and for which the external envelope is primarily designed for mechanical loads, thermal loads (to limit the possible deformation due to temperature), stiffness of the structure (external mechanical loads and weight of the equipment), taking into account established safe industrial practice, it is considered that pressure is not a significant design factor. Attached parts covering other functions e.g. oil separators, oil coolers, suction accumulators shall comply to EN 14276-1 or EN 13445-6 (cast iron) or EN 13445-8 (aluminium) or showing compliance to the relevant European requirements. This applies also to shells for hermetic compressors either welded or with any kind of permanent joint. Requirements for compressors used in explosive atmospheres are not covered by this standard. NOTE 3 For further guidance see EN 13463-1. This standard deals with all significant hazards, hazardous situations and events relevant to compressors, when they are used as intended and under conditions for misuse which are reasonably foreseeable by the manufacturer (see Clause 4).

百检能给您带来哪些改变?

1、检测行业全覆盖,满足不同的检测;

2、实验室全覆盖,就近分配本地化检测;

3、工程师一对一服务,让检测更精准;

4、免费初检,初检不收取检测费用;

5、自助下单 快递免费上门取样;

6、周期短,费用低,服务周到;

7、拥有CMA、CNAS、CAL等权威资质;

8、检测报告权威有效、中国通用;

客户案例展示

  • 上海朗波王服饰有限公司
  • 浙江圣达生物药业股份有限公司
  • 天津市长庆电子科技有限公司
  • 上海纽特丝纺织品有限公司
  • 无锡露米娅纺织有限公司
  • 东方电气风电(凉山)有限公司