BS EN 820-5-2009 高级工业陶瓷.单片陶瓷的热机械性能.第5部分:高温下弹性模量的测定

标准号：BS EN 820-5-2009
中文标准名称：**工业陶瓷.单片陶瓷的热机械性能.第5部分:高温下弹性模量的测定
英文标准名称：Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5:Determination of elastic moduli at elevated temperatures
标准类型：Q32
发布日期：2009/7/31 12:00:00
实施日期：2009/7/31 12:00:00
中国标准分类号：Q32
国际标准分类号：81.060.30
引用标准：EN 820-1;EN 843-1-2006;EN 60584-2;EN ISO 7500-1;EN ISO/IEC 17025;ISO 463;ISO 3611;ISO 6906
适用范围：This part of EN 820 describes methods for determining the elastic moduli, specifically Young's modulus, shear modulus and Poisson's ratio, of advanced monolithic technical ceramics at temperatures above room temperature. The standard prescribes three alternative methods for determining some or all of these three parameters:A the determination of Young's modulus by static flexure of a thin beam in three- or four-pointbending.B the determination of Young's modulus by forced longitudinal resonance, or Young's modulus, shear modulus and Poisson's ratio by forced flexural and torsional resonance, of a thin beam.C the determination of Young's modulus from the fundamental natural frequency of a struck bar(impulse excitation method).This part of EN 820 extends the above-defined room-temperature methods described in EN 843-2 to levated temperatures. All the test methods assume the use of homogeneous test pieces of linear elastic materials. The test assumes that the test piece has isotropic elastic properties. At high porosity levels all of the methods can become inappropriate. The maximum grain size (see EN 623-3), excluding deliberately added whiskers, should be less than 10 % of the minimum dimension of the test piece.