BS M 69-1993 航空货运设备.航空和航空/陆地货运托盘.规范和试验

标准号：BS M 69-1993
中文标准名称：航空货运设备.航空和航空/陆地货运托盘.规范和试验
英文标准名称：Air cargo equipment. Air and air/land cargo pallets. Specification and testing
标准类型：A85
发布日期：1993/8/15 12:00:00
实施日期：1993/8/15 12:00:00
中国标准分类号：A85
国际标准分类号：49.120;55.180.30
适用范围：This International Standard specifies dimensional, structural and environmental requirements for 2,44 m (8 ft) wide pallets to be used in freight ver-sions of high-capacity fixed-wing aircraft, intended to be compatible with the 2,44 m × 2,44 m (8 ft × 8 ft) cross-section containers described in ISO 8323. Pallet nets to be used in conjunction with these pallets are described in ISO 4115. This International Standard establishes three classes of pallet: — Type A, air-only pallets; — Type B, air/land pallets; — Type C, adapter pallets. Pallets have a nominal width of 2,44 m (8 ft) and nominal lengths of 3 m, 5 m, 6 m, 9 m and 12 m (10 ft, 16 ft, 20 ft, 30 ft and 40 ft). Air-only pallets (Type A) will normally be handled on aircraft equivalent roller conveying systems and/or on similarly equipped ancillary ground handling devices. The 5 m (16 ft) pallet is to be used only with this type. Air/land pallets (Type B) are suitable for air/land handling and transport systems. Supplementary re-quirements for type B pallets are found in 5.5.1. Air-adapter pallets (Type C) are used to adapt 2,44 m × 2,44 m (8 ft × 8 ft) surface-mode only con-tainers (see ISO 1496-1) for air transport. Supple-mentary requirements for the Type C version are found in 5.5.2. Use of the adapter pallet with surface-mode only 2,44 m × 2,44 m (8 ft × 8 ft) containers may require uniform load distribution on the base cross members of these containers for carriage on certain aircraft. The air-craft approved weight and balance manual should be re-ferred to for loadability procedures and/or limitations.