ANSI/ASTM D4801-1995 厚度为0.25M(0.01in)以上的聚乙烯薄板规范

标准号：ANSI/ASTM D4801-1995
中文标准名称：厚度为0.25M(0.01in)以上的聚乙烯薄板规范
英文标准名称：Specification for Polyethylene Sheeting in Thickness of 0.25M (0.010 in) and Greater (08.03)
标准类型：G33
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：G33
国际标准分类号：83.140.10
适用范围： This specification covers requirements for extruded (cast or blown) and compression-molded sheeting made from low-, medium- and high-density polyethylenes and copolymers in thickness of 0.25 mm [0.010 in.] and greater. Depending on the functional requirements, sheeting conforming to this specification is used in applications such as chemical tank linings, spacers in electrical equipment, thermoforming into such items as trays, pallets, and shipping containers, and as machine-shop stock. Polyethylene materials, being thermoplastics, are reprocessable and recyclable (see Guides D 5033 and D 7209). This specification allows for the use of those polyethylene plastic materials, provided that any specific requirements as governed by the producer and end user are met. The values stated in SI units are to be regarded as standard. The values given in brackets are for information only. The following precautionary caveat pertains only to the test methods portion, Section 11, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. -There is no known ISO equivalent to this standard.