BS EN ISO 13628-5-2009 石油和天然气工业.水下采油系统设计和操作.水下脐带管

标准号：BS EN ISO 13628-5-2009
中文标准名称：石油和天然气工业.水下采油系统设计和操作.水下脐带管
英文标准名称：Petroleum and natural gas industries - Design and operation of subsea production systems - Subsea umbilicals
标准类型：E94
发布日期：2010/1/31 12:00:00
实施日期：2010/1/31 12:00:00
中国标准分类号：E94
国际标准分类号：75.180.10
引用标准：ISO 4406;ISO 1402;ISO 4080;ISO 527;ISO 4672-1997;ISO 6801;ISO 6803-2008;ISO 7751;ISO 13628-8;ISO 8308;IEC 60228;IEC 60502-1;IEC 60502-2;IEC 60793-1-1;IEC 60793-2;IEC 60794-1-1;IEC 60793-1-2;EN 10204-2004;ASTM A240;ASTM A370;ASTM A480;ASTM A789/A789M;ASTM
适用范围：This part of ISO 13628 specifies requirements and gives recommendations for the design, material selection, manufacture, design verification, testing, installation and operation of umbilicals and associated ancillary equipment for the petroleum and natural gas industries. Ancillary equipment does not include topside hardware. Topside hardware refers to any hardware that is not permanently attached to the umbilical, above the topside hang-off termination.This part of ISO 13628 applies to umbilicals containing components, such as electrical cables, optical fibres, thermoplastic hoses and metallic tubes, either alone or in combination.This part of ISO 13628 applies to umbilicals for static or dynamic service, with surface-surface, surfacesubsea and subsea-subsea routings.This part of ISO 13628 does not apply to the associated component connectors, unless they affect the performance of the umbilical or that of its ancillary equipment.This part of ISO 13628 applies only to tubes with the following dimensions: wall thickness, t < 6 mm, internal diameter, ID < 50,8 mm (2 in). Tubular products greater than these dimensions can be regarded as pipe/linepipe and it is expected that they be designed and manufactured according to a recognised pipeline/linepipe standard.This part of ISO 13628 does not apply to a tube or hose rated lower than 7 MPa (1 015 psi).This part of ISO 13628 does not apply to electric cable voltage ratings above standard rated voltagesU0/U(Um) = 3,6/6(7,2) kV rms, where U0, U and Um are as defined in IEC 60502-1 and IEC 60502-2.