BS ISO 3070-3-2007 机床.测试卧式镗床和铣床精度的试验条件.带有可移动床身和可移动工作台的机床

标准号：BS ISO 3070-3-2007
中文标准名称：机床.测试卧式镗床和铣床精度的试验条件.带有可移动床身和可移动工作台的机床
英文标准名称：Machine tools - Test conditions for testing the accuracy of boring and milling machines with horizontal spindle - Machines with movable column and movable table
标准类型：J54
发布日期：2008/1/31 12:00:00
实施日期：2008/1/31 12:00:00
中国标准分类号：J54
国际标准分类号：25.080.20
适用范围：This part of ISO 3070 specifies, with reference to ISO 230-1, ISO 230-2 and ISO 230-7, geometric tests, machining tests, spindle tests and tests for checking the accuracy and repeatability of positioning by numerical control of general purpose, normal accuracy, horizontal spindle boring and milling machines having a movable column and movable table. This part of 3070 also specifies the applicable tolerances corresponding to these tests. This type of machine can be provided with spindle heads of different types, such as those with sliding boring spindle and milling spindle, sliding boring spindle and facing head, or ram or milling ram. This part of ISO 3070 concerns machines having movement of the column or column saddle on the bed (X axis), vertical movement of the spindle head (Y axis), movement of the boring spindle or ram (Z axis) and, possibly, a feed movement of radial facing slide in the facing head (U axis). Some machines also have an intermediate saddle with slideways between column and bed to achieve additional movement of the column parallel to the spindle axis (W axis). NOTE In ISO 3070-1 spindle ram movement is designated as the W axis. This part of ISO 3070 deals only with the verification of the accuracy of the machine. It does not apply to the operational testing of the machine (e.g. vibration, abnormal noise, stick-slip motion of components) nor to machine characteristics (e.g. speeds, feeds), as such checks are generally carried out before testing the accuracy.