BS EN 1337-5-2005 结构轴承.第5部分:筒轴承

标准号：BS EN 1337-5-2005
中文标准名称：结构轴承.第5部分:筒轴承
英文标准名称：Structural bearings - Part 5: Pot bearings
标准类型：J11
发布日期：2006/12/29 12:00:00
实施日期：2006/12/29 12:00:00
中国标准分类号：J11
国际标准分类号：91.010.30
引用标准：EN 1337-1-2000;EN 1337-2-2004;EN 1337-9-1997;EN 1337-10;EN 1990
适用范围：This part of EN 1337 specifies the requirements for the design and manufacture of pot bearings which will be used for operating temperatures between – 40 °C and 50 °C.This part of EN 1337 does not apply to pot bearings made with other materials than those specified in clause 5.Bearings which are subjected to rotation αd greater than 0,030 rad (see Figure 2) under the characteristic combination of actions or which incorporate elastomeric pads larger than 1500 mm in diameter are beyond the scope of this document.Depending on the climatic region where the construction work is located the bearings can be designed to one of the following classes related to minimum operating temperatures (the minimum shade air temperatures): - 25 °C or – 40 °C.When required to accommodate translational movements, pot bearings may be combined with sliding elements in accordance with EN 1337-2.