DIN 2099-1-2003 圆丝材和棒材制螺旋式弹簧.第1部分:冷成形压缩弹簧所需的信息.打印表格A

标准号：DIN 2099-1-2003
中文标准名称：圆丝材和棒材制螺旋式弹簧.第1部分:冷成形压缩弹簧所需的信息.打印表格A
英文标准名称：Helical springs made of round wire and rod - Part 1: Information to be given in order to obtain the cold formed compression spring required; Printed form A
标准类型：J26
发布日期：1999/12/31 12:00:00
实施日期：1999/12/31 12:00:00
中国标准分类号：J26
国际标准分类号：21.160
引用标准：DIN EN ISO 216;DIN 2095;DIN EN 13906-1
适用范围：This standard applies without restriction solely to cold formed helical compression springs made from wire andbar.It specifies a form in A4 format according to DIN EN ISO 216 for the information to be supplied on thesecompression springs.NOTE 1 When designing compression springs from sectional steel, it shall be noted that non-standardized sectionscannot always be supplied, in many cases, however, the square section can be replaced by a circular cross-section.NOTE 2 If compression springs made of sectional steels cannot be avoided in special cases, e.g. for installationreasons, it is necessary to consult the spring manufacturer. The form can then be completed according to correspondingagreements about design and permissible deviations.