BS EN 14064-1-2010 建筑物隔热产品.现场制疏松填装矿棉(MW)的产品.第1部分: 安装前疏松装填产品的规格

标准号：BS EN 14064-1-2010
中文标准名称：建筑物隔热产品.现场制疏松填装矿棉(MW)的产品.第1部分: 安装前疏松装填产品的规格
英文标准名称：Thermal insulation products for buildings.In-situ formed loose-fill mineral wool (MW) products. Part 1: Specification for the loose-fill products before installation
标准类型：Q25
发布日期：2010/8/31 12:00:00
实施日期：2010/8/31 12:00:00
中国标准分类号：Q25
国际标准分类号：91.100.60
适用范围：This European Standard specifies the requirements for blown loose-fill mineral wool products for in-situinstallation in lofts, masonry cavity walls and frame constructions.This European standard is a specification for the insulation products before installation. It describes theproduct characteristics and includes procedures for testing, marking and labelling.This document does not specify the required level of a given property to be achieved by a product todemonstrate fitness for purpose in a particular application. The levels required for a given application are to befound in regulations or non-conflicting standards.NOTE To avoid water penetration in masonry walls special tests adjusted to local climate might be needed.This document does not cover factory made mineral wool (MW) insulation products or in-situ products intendedto be used for the insulation of building equipment and industrial installations.Products with a declared thermal resistance lower than 0,25 m2·K/W or a declared thermal conductivitygreater than 0,060 W/(m·K) at 10 °C are not covered by this document.This document does not cover products intended for airborne sound insulation and for acoustic absorptionapplications.