BS EN 1071-13-2010 高级工业陶瓷.陶瓷涂层用试验方法.销对盘方法测定磨损率

标准号：BS EN 1071-13-2010
中文标准名称：**工业陶瓷.陶瓷涂层用试验方法.销对盘方法测定磨损率
英文标准名称：Advanced technical ceramics - Methods of test for ceramic coatings - Determination of wear rate by the pin-on-disk method
标准类型：Q32
发布日期：2010/6/30 12:00:00
实施日期：2010/6/30 12:00:00
中国标准分类号：Q32
国际标准分类号：81.060.30
适用范围：1.1 This European Standard describes a method for evaluating the wear of ceramic coatings by use of a testin which a flat or spherically ended pin is brought, under load, into contact with the flat surface of a disk andthe two are set in relative motion such that the pin describes a circular path on the disk. Depending on theconditions being simulated, either the pin or disk or both may be coated with the material under test, with theother member of the couple being selected for its relevance to the system under evaluation.1.2 Where suitable equipment is available, the test may be used to determine the friction generated in thesliding contact.1.3 The method is suitable for evaluating coatings in the thickness range from 1 μm to more than 100 μm,and with suitable choice of conditions might also be applicable to testing thinner coatings.1.4 Testing may be under either dry or lubricated conditions. However, the test is not designed for evaluatingthe properties of lubricants except insofar as they affect the wear behaviour of the materials being tested.Related methods for testing lubricants using a reciprocating motion are given in references [4] – [6].1.5 Testing a materials couple under a range of loading conditions might provide information about theadhesive and/or cohesive strength of the coating, in addition to its wear behaviour.