BS 7371-7-2010 金属紧固件涂层.采用机械法施加锌涂层规范

百检网 2021-07-15
标准号:BS 7371-7-2010
中文标准名称:金属紧固件涂层.采用机械法施加锌涂层规范
英文标准名称:Coatings on metal fasteners - Specification for mechanically applied zinc and zinc based coatings
标准类型:A29
发布日期:2010/4/30 12:00:00
实施日期:2010/4/30 12:00:00
中国标准分类号:A29
国际标准分类号:21.060.10;25.220.40
适用范围:This part of BS 7371 specifies requirements for coatings applied bymechanically impacting zinc powder, or zinc based powder on to thecomponent surface in an aqueous medium. The coating is not appliedby using impact media accelerated by compressed air or centrifugemethods. The coatings consist principally of zinc and can be lubricatedto give controlled torque/clamping force properties when required.This part of BS 7371 also specifies requirements for:a) the coating thickness;b) the type of conversion treatment to be applied, which can behexavalent, tri-valent or chromium free;c) the quality assessment of the corrosion resistance of unusedcoated parts when subjected to neutral salt spray testing;NOTE 2 See, for example, BS EN ISO 9227.d) the adhesion test.The coatings are suitable for application to metal components such as:1) parallel threaded fasteners and accessories;2) screws that cut or form their own threads, e.g. self-tappingscrews;NOTE 3 See, for example, BS 4174.3) woodscrews;NOTE 4 See, for example, BS 1210.4) springs and spring components;5) pipe nuts and connectors with parallel or tapered threads;6) composite fasteners incorporating non-conducting materials(e.g. rubber-bonded assembly).When these coatings are applied to non-ferrous fasteners, the only partof the specification that applies is the coating thickness requirements.

百检能给您带来哪些改变?

1、检测行业全覆盖,满足不同的检测;

2、实验室全覆盖,就近分配本地化检测;

3、工程师一对一服务,让检测更精准;

4、免费初检,初检不收取检测费用;

5、自助下单 快递免费上门取样;

6、周期短,费用低,服务周到;

7、拥有CMA、CNAS、CAL等权威资质;

8、检测报告权威有效、中国通用;

客户案例展示

  • 上海朗波王服饰有限公司
  • 浙江圣达生物药业股份有限公司
  • 天津市长庆电子科技有限公司
  • 上海纽特丝纺织品有限公司
  • 无锡露米娅纺织有限公司
  • 东方电气风电(凉山)有限公司