BS DD CLC/TS 61850-80-1-2010 电动控制的通信网络和系统.使用IEC 60870-5-101或IEC 60870-5-104基于CDC数据模型中交换信息指南
百检网 2021-07-15
标准号:BS DD CLC/TS 61850-80-1-2010
中文标准名称:电动控制的通信网络和系统.使用IEC 60870-5-101或IEC 60870-5-104基于CDC数据模型中交换信息指南
英文标准名称:Communication networks and systems for power utility automation - Guideline to exchanging information from a CDC-based data model using IEC 60870-5-101 or IEC 60870-5-104
标准类型:M11
发布日期:2010/3/31 12:00:00
实施日期:2010/3/31 12:00:00
中国标准分类号:M11
国际标准分类号:33.200; 33.040.40
引用标准:IEC 60870-5-3;IEC 60870-5-4-1993;IEC 60870-5-5-1995;IEC 60870-5-101-2003;IEC 60870-5-104-2006;IEC 61850;IEC 61850-6;IEC 61850-7-2-2003;IEC 61850-7-3;IEC 61850-8-1;Document 57/963/INF;IEC 61400-25-2;IEEE 754-2008;RFC 2200
适用范围:This technical specification gives a guideline on how to exchange information from a CDCbaseddata model (for example IEC 61850) using IEC 60870-5-101 or IEC 60870-5-104between substation(s) and control center(s). Mostly guidelines for functions needed in asubstation gateway device are given.The goal of this technical specification is to describe standardized mapping of device-orienteddata models (for example IEC 61850) with already defined attributes of CDC's and services(for example IEC 61850-7) onto the already defined ASDU's and services of IEC 60870-5-104or IEC 60870-5-101. It is not the goal of this technical specification to add any extensions topublished standards (for example IEC 61850 or IEC 60870-5-104 or IEC 60870-5-101).After an introduction giving a basic description of the mapping, the mapping of the informationmodel with associated data classes, and the mapping of services are described. Clause 9shows how the mapped data and services according to the IEC 60870-5-104 andIEC 60870-5-101 protocol are marked (selected) in the interoperability sheet.The scope of this technical specification is to achieve real-time exchange of processinformation required for operational purposes between a substation using a CDC-based datamodel (for example IEC 61850) and (a) control centre(s) using a communication link over awide area network (WAN) compliant to the definitions of IEC 60870-5-101 or IEC 60870-5-104. The amount of real-time information provided by the substation-gateway device can varydependent on the operational needs. Actors could be regional and nationwide control centersthat receive real-time information in order to monitor and control geographically widespreadprocesses. The described mapping can be used for several fields of application of powerutilities, such as substations, hydro and wind power plants, and decentralized energyresources DER. The mapping is based on the definitions of the standard series IEC 61850Edition 1.0 and IEC 60870-5-104:2006/IEC 60870-5-101:2003. The scope of the mappedIEC 60870-5-104 and IEC 60870-5-101 subset is given in Clause 9.This technical specification focuses mainly on defining rules and functions of a gatewaydevice as a part of the substation. However, the rules and functions are also valid when anIED may optionally be connected directly to a WAN compliant with IEC 60870-5-101 orIEC 60870-5-104 and therefore, the mapping has to be done inside the IED.
百检能给您带来哪些改变?
1、检测行业全覆盖,满足不同的检测;
2、实验室全覆盖,就近分配本地化检测;
3、工程师一对一服务,让检测更精准;
4、免费初检,初检不收取检测费用;
5、自助下单 快递免费上门取样;
6、周期短,费用低,服务周到;
7、拥有CMA、CNAS、CAL等权威资质;
8、检测报告权威有效、中国通用;